Ozone Sterilization For Cannabis Grow Rooms

Ozone is the perfect Sterilization tool for Cannabis Grow Rooms

The final harvested product must be free from bacteria and mould to be sold to the end-user for consumption. There are standards and good manufacturing processes to adhere to on mould and bacteria counts on final products. Ozone can be used to provide disinfection for this final product to meet the most stringent mould and bacteria standards.

Ozone is used in low atmospheric doses in hospital wards, offices, veterinarian rooms, commercial kitchens and factories to keep the air sterile, sterilize surfaces, prevent the spread of airborne pathogens and keep the place insect, odour and mould free. This same technology is often used in sterilizing any Cannabis grow room to help yield better, healthier crops while preventing a harmful environment for plants.

Sterilizing a Cannabis Grow Room with 100% Chemical-Free Ozone Gas (while unoccupied) will:

  • Sterilize Hard To Reach Areas
  • Provide Higher Crop Yields (Increase Your Agricultural Output!)
  • Kill Bacteria
  • Kill Mould and Powdery Mould Spores
  • Prevent Bud Rot
  • Kill Spider Mites and all other pest insects and destroy their colonies
  • Kill Mildew
  • Eliminate Microbes, Algae & Root-Born Pathogens
  • Kill Fungi
  • Eliminate Hydrogen Sulphide
  • Permanently Destroy all Odours

Your Natural Solution to a Clean Environment

Ozone is a true sterilizer 3,000 times more effective than chlorine bleach.

Can Sterilize Cannabis Grow Rooms up to 19,000 cubic ft.

Smaller Cannabis Grow Rooms: 3-6 hour cleaning treatment
Larger Cannabis Grow Rooms: 7-9 hour cleaning treatment


Below are a couples of Research links about Ozone Sterilization of Cannabis Grow Rooms

Ozonator for Hydroponics

More information including lots of benefits of Ozone for Cannabis/Hydroponic Grow Rooms

Visit Website?

Ozone: An Indoor Garden Super Tool

Get the full scoop on how added Ozone can help grow great yields for your Cannabis/Hydroponic Operation.

Visit Website?

FAQ’s for Ozone and Cannabis Grow Rooms

No! Island Ozone’s Hydroponic Ozone Treatment is intended for “Unoccupied spaces”. People, Pets, AND your Plants must be completely removed from the grow room. The room is then sterilized destroying all the harmful things that can hinder your plant’s full growing potential, and once the Ozone is aired out, all the air in your grow room naturally reverts back to safe O2. Some people attempt to run an ozone generator while their plants are in the grow room, THIS is harmful to your plants. And if your ozone generator is operating at a low-output level that ISN’T harmful to plants, then it’s not doing its job of sterilizing to its full potential. Again the idea is high-output Ozone sterilization for UNOCCUPIED spaces.
Not necessarily. Some cleaning agents you are currently using may very well be beneficial to the routine physical cleaning process but an Ozone Treatment will destroy all airborne, harmful chemicals and anything else that can hinder your plant’s growing potential.
An Ozone Treatment should be the last thing done before you begin growing again. Remove all plants from the room, do all your routine physical cleaning first, place all your tools and things out like scalpels, fans, pruners, screens, pH meters, etc. (because Ozone will sterilize EVERYTHING) and then arrange to get an Ozone Treatment performed.
Yes, but it won’t take care of any physical residue. In THIS case, you may want to get an ozone treatment performed before you go and attack any physical residue.
You could, but the problem is that most Ozone Generators are expensive, require regular and difficult maintenance, could be dangerous if not operated properly (or by a professional) and they’re not nearly powerful enough to be fully effective. Island Ozone offers an industrial level of Ozone handled safely and professionally, and takes the worry, hassle and stress off of you.
Associating Ozone with smog and pollution is a common misconception. Ozone is NOT greenhouse gas. Ozone is a very important part of protecting us, plants and all forms of life on Earth from the sun’s harmful UV Rays. The Scientists are actually concerned about the depletion of our Ozone Layer (too little ozone, not too much ozone)
Island Ozone uses an industrial level of Ozone gas produced by Ozone Generators which are custom-made by a BCIT-Trained Electrical Engineer. Island Ozone specializes in air quality control, odour removal and ozone sterilization and gives you peace of mind with our 100% chemical-free solution. We provide the most optimal level of Ozone gas specific to your needs in an efficient, timely manner and at an affordable price. Afterwards you are left with a bacteria-free, fresh-smelling environment.

How Cleaning With Ozone Works

Ozone cleaning begins when industrial Ozone generators are brought on site. Island Ozone uses custom built generators designed and built with the help of an Electrical Engineer (Schooled at BCIT) to perform a method called “corona discharge.” A method which involves shocking the O² in the air by using electricity to emulate little lightning strikes to split the O² into 2 single oxygen atoms. Single oxygen atoms naturally need to latch onto something because they’re very unstable. So they naturally combine with the O² in the air to form O³ (Which is Ozone). Ozone is very reactive so it begins reacting with bacteria, and the molecules that cause bad odours and dissolves the outer membrane of the bacteria causing them to pop like a balloon. They cannot adapt to this. The Ozone does it’s job and then naturally reverts back to Oxygen leaving no residue behind.

More Info

Want to know more?

Contact us to see how we can help sterilize your environment

Contact Us Today

Share With a Friend?